Alesis Strike Amp 8 Mk2.

Description

Powerful Partner for Electronic Drums
The Alesis Strike Amp 8 MK2 is a high-performance bi-amped speaker specially designed for Electronic Drums. It outputs a massive 2000 watts, so you have enough headroom for almost any performance or rehearsal. The heavy duty 8 woofer and 1 high-frequency compression driver are tuned for a flat response across the spectrum to deliver the most accurate and authentic representation of acoustic and electronic drum sounds from your instrument. Strike Amp 8 MK2s performance is exceptional, with a max 130dB SPL and a 52Hz-20kHz frequency range; wide enough to deliver the full thump of your kick drum, right up to the crystal-clear snap of your snare and hi-hats.
All the Connections You Need – including Bluetooth
Strike Amp 8 MK2 features two combo XLR + 1/4″ combo inputs for connecting your electronic drum kit and/or a multi-pad instrument, each with its own independent volume controls. You can also wirelessly connect a mobile device to the Strike Amp 8 MK2 via Bluetooth, so you can stream music wirelessly while rehearsing or during set breaks. There is also an XLR output for chaining more than one speaker together or sending the signal from your Strike Amp out to a front-of-house mix.
Adapts to Any Stage or Room
Stages and rehearsal rooms can easily become dense and muddy sounding as lower frequencies from different instruments battle each other; Strike Amp 8 MK2 has a HPF EQ switch to quickly pull troublesome frequencies out and make sure your tone sits perfectly in the mix. Unwanted electrical noise can also be a common problem; Strike Amp 8 MK2s ground lift switch can eliminate hums and buzzes from ground loops.
Road-Ready Lightweight Design
Strike Amp 8 MK2 is rugged yet lightweight and easy to transport (at 21 lbs. / 9.53 kg) making load-ins at the gig or rehearsal space easier than ever. While you can use Strike Amp 8 MK2 in its intended wedge position, its versatile design means that it can also be used in an upright or pole-mounted position, making it easier to direct your sound wherever you need it, which is especially helpful for outdoor gigs or other places where PA backline is limited.
Specifications:

Output Power: 2000 W
Drivers: – Low-Frequency: 8.0 (203 mm) driver, 2.0 (50 mm) high-temperature voice coil. – High-Frequency: 1.0 (25 mm) exit ceramic driver with 1.4 (35 mm) coil.
Crossover Frequency: 2 kHz
Maximum SPL: 130 dB (peak) dB-SPL @ 1 m
Frequency Response: 62 Hz 20 kHz (+/-3 dB)
Frequency Range: 52 Hz 20 kHz (-10 dB)
Horn Coverage: 90 horizontal x 60 vertical (nominal)
Connectors: – (2) XLR+1/4 (6.35 mm) TRS combo inputs (Balanced) – (1) XLR output (Link) – (1) IEC power cable input
Input Impedance: Line: 10 K balanced, 20 K unbalanced
HPF Switch: 100 Hz
Bluetooth: – Version: 5.0 – Profile: A2DP, AVRCP – Codec: SBC – Range: up to 100 feet (30.5m)
Power: – Connection: IEC – Input Voltage: 100-120V, 50/60 Hz; 220-240V, 50/60 Hz – Consumption: 1100W – Fuse: T15AL AC250V; 220-240V T6.3AL AC250V
Protection: Electronic clip, thermal, and transducer overdrive protection
Mounting/Installation: Standard 36 mm pole socket
Operating Temperature: 14F to 113F / -10C to 45C
Dimensions: – Width: 256mm – Depth: 245 mm – Height: 436 mm – Weight: 9.5 kg