Avantone MixCube Active Full-Range Studio Monitors in Black (pair).

Description

The Avantone MixCube monitors are powered full-range mini reference monitors. Their awesome design was inspired by the legendary 5C Sound cubes found in many top studios around the world. The design has been tweaked to get a smooth, open and transparent tone.
Most studios primarily use bigger 2-way and 3-way monitorsto mix their music, so that they can hear a full mix at higher listening levels and with multi driver setups. However, it is also useful to hear what you’re mix will sound like with smaller speakers, so that you can check if the mix translates when heard on a car stereo, TV or other single driver system. The MixCubemonitors aredesigned to offer a similar environment to these situations, whilst maintaining the clarity and depth of a reference monitor so that you can quickly and easily identify issues in your mix.
Features
Balanced InputThis combo XLR input accepts a BALANCED male XLR plug as well as a 3-conductor BALANCED TRS or a 2 conductor UNBALANCED TS male plug. For unbalanced operation with a TS connector the minus signal is automatically grounded.
System GainThis variable control adjusts the sensitivity of the signal that appears at the input. Rotating the control clockwise increases the sensitivity while a counter-clockwise rotation decreases sensitivity. The adjustable gain range is from -30 to +6 dB. A setting of +6 allows a full, unimpeded signal to be sent to the amplifier. The detented gain positions allow for repeatable settings between speakers for proper matching. Please Note when the signal appearing at the input is too hot, the amplifier can overload causing distortion and possible damage to the speaker. If overload occurs, attenuate (decrease) the input level by turning the knob counter-clockwise a few clicks.
On/Off SwitchThis illuminated switch turns the amplifier section on and off. The unit is still receiving power from the transformer however.
AC Input This input is only to be use with the proprietary AVANTONE Power Supply. Tighten the cable/connector securely for reliable operation. Note: There is a switch on the power supply for selecting the proper AC/MAINS operating voltage for your location.
Ground Lift SwitchBy engaging this switch the pin 1 shield is lifted at the input jack. This can be used to aid in ground loop control of the incoming analog line signal.
PlacementWhen positioning the Avantone Active MixCubes on stands or console bridges it is best to keep them at ear level and slightly angled in towards the engineer. Since they are shielded it is ok to place them near a CRT video monitor or TV without causing any problems. The bottom mic stand mounts will also allow you creative positioning options in unusual studio playback situations.
Specifications
System TypeActive (Self-powered) shielded full-range stereo pair
Frequency Response90Hz – 17,000Hz (useful musical range)
>Driver ImpedanceNominal 8 ohms
Max SPL104db @ 1 meter = 1%THD (PINK NOISE)
Amplifier TypeClass A/B
Amplifier Power60 watts RMS@ .005% THD (1KHz)
Amp Frequency Response22Hz-50KHz +0dB/- 3dB (90Hz-50KHz +/-0dB)
NoiseS/N -113 dB
Sensitivity0dBu (.775VRMS) input at maximum volume (+6dB) = 104dB SPL
DriverProprietary design 5.25″ cast aluminum frame / paper cone / shielded
Cabinetsealed / 18mm MDF / Dacron acoustical stuffing
InputsXLR & TRS (COMBO JACK) +4/Balanced and -10 unbalanced
Weight7 lb 5 oz (per speaker)
Dimensions165mm x 165mm x 165mm (6 1/2″ x 6 1/2″ x 6 1/2″ in)