Animals Pedals Angel Bear Face Fuzz Pedal.

Description

Based on one of the most well-known fuzz pedals in the world, this highly expressive fuzz pedal can change from a thick, heavy fuzz sound to a sparkling clean sound just by adjusting the guitar volume.The Fuzz Face was created in the 1960s and was made using germanium transistors, which were a common component at the time. When silicon transistors became more commonplace instead of germanium transistors, circuits naturally shifted to using silicon transistors. There is no superiority or inferiority between the two, and both are loved by many guitarists and have been used to great effect.
The Animals Pedals Angel Bear Face Fuzz Pedal is a fuzz pedal developed by Skreddy Pedals based on the Fuzz Face, which uses silicon transistors.
This fuzz pedalis thick, full, and powerful, making it instantly recognizable as a Fuzz Face. Start by setting the FUZZ knob to maximum and adjusting the volume with LEVEL.
Then, try switching the guitar’s Volume control or pickup selection to see how the sound changes.
The Angel Bear Face Fuzz Pedal can switch between modes with the BRIGHT/JUICY switch. These two modes do not change the tone significantly. In either mode, you can definitely hear the unique tone of the Fuzz Face.
This switch is for switching between different tones, similar to adjusting the Tone control on a guitar. In BRIGHT mode, the tone is sharper and a little clearer, while in JUICY mode, the tone is thicker and fuller.
This is a pedal that allows you to easily enjoy the superb sound of a vintage Fuzz Face, making it a fuzz pedal truly worthy of being called a masterpiece.
Controls

LEVEL: Adjusts the volume.
FUZZ: Adjusts the fuzz distortion. Basically, try adjusting it with the maximum setting as a starting point. You can also adjust the intensity of the distortion with the guitar’s Volume knob.
BRIGHT/JUICY: Sets the fuzz mode. Switches the texture and thickness of the fuzz feel. Choose according to your preference. When switching for the first time, the sound may cut out for a moment.

ANGEL BEAR FACE FUZZ features a true bypass footswitch and is powered by a 9V battery or a standard center negative DC9V adapter.
*When using batteries, be sure to unplug the unit from the input jack to prevent battery drain when storing the unit. Also, remove the batteries if you will not be using the unit for an extended period of time.
Specifications

Current consumption: 3.5mA
Input impedance: 10K ohm
Output impedance: 200 ohm
Size: 64(W)108(D)49(H)mm
Weight: 380g