Audio-Technica ATM350PL Cardioid Condenser Microphone w/ Piano Mounting System.

Description

Here’s what Audio-Technica say about the ATM350PL:

The ATM350a is the ultimate microphone solution for discreet, rock-solid mounting on your instrument of choice, from Piano to 20-piece Drum Kit. Offering a crisp, clear, well-balanced response, even at extreme SPLs, the ATM350a is ready to capture your sound, whatever instrument you choose. The AT8491P magnetic piano mount allows true flexibility on grand and upright pianos. The ATM350PL Cardioid Condenser Instrument Microphone w/ Piano Mounting System (Long) includes: ATM350a microphone, AT8490L gooseneck (long), AT8491P piano mount, AT8543 power module, AT8468 velcro mount and a hard carrying case.

Features

Magnetic piano mount allows true flexibility on grand and upright pianos
Packaged with AT8490L Long Gooseneck
Built to handle extremely powerful, dynamic sound sources
Large selection of other mount options available separately
Lifetime Warranty

Specifications

Element: Fixed-charge back plate, permanently polarized condenser
Polar Pattern: Cardioid
Frequency Response: 40 20,000 Hz
Open Circuit Sensitivity: 49 dB (3.5 mV) re 1V at 1 Pa
Impedance: 200 ohms
Maximum Input Sound Level: 159 dB SPL, 1 kHz at 1% T.H.D.
Low Frequency Roll Off: 80 Hz, 12 dB/octave
Switches: Flat, roll-off
Dynamic Range: 130 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio: 65 dB, 1 kHz at 1 Pa
Phantom Power Requirements: 11 52V DC, 3.5 mA typical
Weight Microphone: 14.5 g (0.5 oz)Powermodule: 90 g (3.2 oz)
Dimensions: Microphone: 37.8 mm (1.49”) long, 12.2 mm (0.48”) maximum body diameter. Powermodule: 92 mm (3.62″) long, 18.9 mm (0.74″) diameter
Output Connector: Powermodule: Integral 3-pin XLRM-type
Cable: 4.0 m (13.1′) long (permanently attached to microphone), 3.2 mm (0.13″) diameter, 2-conductor shielded cable with HIROSE HR10-type connector
Accessories Included ATM350a cardioid condenser microphone; AT8543 power module; AT8491P UniMount magnetic piano mount; AT8490L UniMount 9″ gooseneck; AT8468 violin mount (hook-and-loop fastener); protective carrying case