Markbass Little Mark Tube 800 Bass Head.

Description

Heres what Markbass says about the Little Mark Tube 800
The Little Mark Tube solves the tube or solid state dilemma. The Little Mark Tube 800 goes a step further by also addressing that other perennial concern, Will I have enough power? The 800 watts from this powerful amp will satisfy any thirst for power, and the two blendable preamps give you the warmth and richness of a tube preamp, the clean attack of a solid state preamp or a mix of both!
Specifications
Inputs

Input 1: impedance 500 Kohm, max. voltage 15 Vpp
Input 2: (Balanced XLR/1/4 combo)
Balanced: impedance 500 Kohm, max. voltage 15 Vpp, phantom power 48V
Effect Return: impedance 33 Kohm, max. voltage 10 Vpp

Controls

Gain 1: -60 dB to +23 dB range
Gain 2: -60 dB to +23 dB range
Master Volume
Line Out Level
Ground Lift: switch on rear panel
Pre/Post EQ: switch on rear panel
Mute: push/pull on master knob
Phantom Power: switch (on INPUT 2 / Balanced)

Equalization

Low: centre frequency 40 Hz; level: 16 dB
Low Mid: centre frequency 360 Hz, level: 16 dB
High Mid: centre frequency 800 Hz, level: 16 dB
High: centre frequency 10 kHz, level: 16 dB
VPF (Variable Pre-shape Filter: centre frequency 380 Hz
VLE (Vintage Loudspeaker Emulator): frequency range 250 Hz-20 kHz

Outputs

Line Out: balanced XLR, max. voltage 20 Vpp
Line Out: unbalanced, max. voltage 20 Vpp (pre-EQ)
Line Out: unbalanced, max. voltage 2 Vpp
Line Out: speakon/1/4 combo, 1/4

Other

Weight: 6.61 lbs / 3 Kg
Width: 10.87 in. / 27.6 cm
Depth: 9.84 in. / 25 cm
Height: 3.27 in. / 8.3 cm
Output Power: 800W RMS @ 4 ohms / 500W RMS @ 8 ohms
Power Requirement: 100/120V; 230V; 240V 50/60Hz (Voltage is factory preset according to region of sale)
Minimum ohm load for all Markbass heads is 4 ohms.
Markbass amps/combos are manufactured to be sold and used in the country of purchase, and they are factory preset to that countrys voltage. Due to homologation issues, the voltage may not be changed.
Rack ears do not come included with this head.